• hotline : +86-510- 8855 1777
          hotline : +86-510-88551777

          Wuxi Jinfan Drilling Equipment Co., ltd.

        1. HOME
        2. ABOUT
        3. NEWS
        4. PRODUCT
        5. PROJECT
        6. VIDEO
        7. JOB
        8. CONTACT
        9. product show
          Position: Home > Product
          YGL-C150 Full Hydraulic Crawler Drilling Rig

          Application

          YGL-C150 Drilling Rig has been widely used in pipe sheds drilling of the tunnel construction; grouting reinforcing hole drilling; but also the drain hole and large tonnage prestressed anchoring hole of the geotechnical engineering, such as boreholes on side slopes of dams, railways, highways, etc; GSHPs hole and water well or water exploration hole.; and the drilling holes of landside preventing and the treatment engineering of rock collapse.

          Feature

          It has adopted top hydraulic rotary power head impact which is Germany imported, multi-angle drilling, and excellence performance.
          The speed of borehole is faster than traditional machine.
          It has no dull pollution and no need air-compressor when drill the incompact ground area, the gravel place and fragment rock stratum.
          Special tube drilling technical. It can drilling fast and insure project firmly.
          In complex condition, it can use double tube rotating drilling, in order to make hole stable and easy to slip casting.
          The drilling rig can be applied for different technique methods and a variety of ground conditions. Especially in the difficult work condition, such as the incompact ground area, the gravel place, and the fragment rock stratum, this drilling can always provide the operator excellent solutions.

          Specification

          Hydraulic Crawler Drilling Rig YGL- C 150
          Total weight kg 7500
          length x width x height (transport status) mm 6100 × 2100 × 2350
          Ambient temperature ° C -10 ~ 38
          nominal drilling depth m 150 ~ 80
          Drilling diameter mm 130 ~ 250
          drilling inclination degree -90 ~ 15
          Horizontal drilling range mm 2050 ~ 3050
          at the top of the impact of rotary power head (original German imports) General / rotary acceleration
          Output speed Ⅰ rpm 32/60
          output torque Ⅰ N.m 9000/7500
          Output speed Ⅱ rpm 64/120
          output torque Ⅱ N.m 4500/3500
          hammer
          impact energy N.m 400
          Impact frequency Min-1 1800
          power head feed
          Stroke mm 3500
          feed force kN 45
          promoted force kN 60
          mast
          slip stroke mm 400
          mast swing angle degrees -30 ~ right 90 or -90 ~ 30
          power machine Cummins Diesel
          Power kW 75
          Speed rpm 2000
          Fuel tank capacity L 150
          crawler chassis PD135
          Shoe width mm 400
          Ground Pressure MPa <0.05
          platform back angle degrees -30 ~ right 90 or -90 ~ 30
          gradeability degree ≤20
          Options hydraulic winch centrifugal slurry pump or drain pump




          Pre:YGL-130 Full Hydraulic Multifunctional Crawler Drilling Rig
          Next:YGL-80 Track-type Anchoring Drilling Rig
              
          Copyright ? 2016 Wuxi Jinfan Drilling Equipment Co., ltd.
          在线观看黄色网站不卡,日韩成a人在线观看,无码不卡免费在线视频,国产亚洲日本在线观看